In an apartment video intercom system, the outdoor station and indoor monitors are what residents and visitors see. The management center is what makes them work. It is where apartments are registered, residents are assigned to units, cards are issued and revoked, and faces are enrolled and deleted. When the management center is configured well, the building entrance runs smoothly for years. When it is configured poorly, the symptoms appear at the door—calls routed to the wrong unit, departed tenants whose cards still open the lobby, and visitors who cannot find the apartment they are looking for.
FARHD’s IP apartment video intercom system includes a management center designed for the people who actually operate it: property managers and building administrators, not technicians. This guide explains what the management center does, how its main functions are used, and how to perform the two most frequent daily operations—adding cards and registering faces—with the discipline that keeps access control accurate over the life of a building.
FARHD, a Chinese manufacturer founded in 1998 with 28 years of experience in video door phones and intercom systems, produces core components—TFT LCD screens, driver boards, and camera modules—in-house, allowing the outdoor station, indoor monitors, and management functions to be designed as one coordinated system.
What the Management Center Does
The management center is the administrative layer of the intercom system. It sits between the physical devices in the building and the records that describe who lives where and who is authorized to enter.
Broadly, it performs five functions:
Device and apartment registration. Each apartment’s indoor monitor is registered and associated with its room number, establishing the link between a directory entry and a physical unit. This is the foundation of correct call routing.
Resident and unit association. Residents are recorded against their apartment, so that card and face credentials can be tied to a specific unit rather than existing as anonymous access records.
Card management. Access cards are issued, modified, and deleted through the management center, with each card associated with a resident or staff member and, where relevant, with a specific permission scope.
Face registration and management. Facial templates are enrolled, reviewed, updated, and deleted, with records of who enrolled which face and when.
Directory and configuration management. The room list, call routing, language settings, and device parameters are configured and maintained here, so that the entrance experience remains consistent as the building changes.
For property managers, the management center is the tool that turns an installed system into an operable building service. For integrators, it is the surface to configure during commissioning and to document at handover.
Preparing Before You Register Anything
Two preparatory steps prevent most of the errors that surface later.
Establish the room numbering scheme first. Confirm whether the building uses 1-digit or 2-digit room numbers, and confirm the format and ordering. Every apartment registration and every directory entry depends on this scheme being consistent. Mixing formats within a building creates routing confusion that is difficult to untangle afterward.
Confirm access to the management interface and administrative credentials. Confirm the administrator account, change any factory default password, and record the credential in the building’s management documentation. An undocumented administrator password becomes a reset procedure later.
A practical note: perform initial configuration and a sample registration for a few units before registering the whole building. Testing call routing and card access on units 1, 2, and the last unit confirms the numbering logic works before it is applied hundreds of times.
Adding Cards: Step-by-Step
Card issuance is the most frequent administrative task in any apartment building. New residents arrive, staff change, contractors need temporary access, and cards are lost. The process should be quick enough for routine use and controlled enough to remain accurate.
Before Adding a Card
Confirm three things:
- The resident or staff member is recorded against the correct apartment or role.
- The card type matches the system — depending on configuration, FARHD systems support 13.56MHz IC and 125kHz ID cards.
- The permission scope is decided — whether the card opens the building entrance only, or also a secondary doorbell-controlled door, a garage, or a restricted area.
The Addition Workflow
The general sequence is consistent across FARHD systems, though exact menu labels vary by firmware version:
- Open the management center and access the card management function.
- Select the target apartment or user record to which the card will be assigned. Assigning the card to a record rather than adding it anonymously is what makes later deletion reliable.
- Enter the card addition mode and present the card to the reader on the outdoor station or a designated enrollment reader.
- Confirm the registration when the system acknowledges the card.
- Verify the card appears in the record with the correct card number and assigned unit.
- Test the card at the actual door before issuing it to the resident.
That final step is often skipped and should not be. Testing at the door confirms that the card, the reader, and the permission scope all work together—and it catches the occasional card that registers but does not read reliably.
Adding Cards at the Outdoor Station
For routine issuance, the outdoor station itself may support card addition, either through a master card or through an on-screen function. This is convenient for property managers who issue cards at the entrance rather than from an office. The trade-off is that on-station addition may not capture the same resident record details as the management center. Where record-keeping matters—as it does in buildings with frequent turnover—using the management center is preferable, with on-station addition reserved for replacement or temporary situations.
Issuing Multiple Cards
For a new resident who needs several cards—for family members, for example—add each card to the same apartment record individually, and keep a record of how many cards were issued to that unit. A documented count makes it possible to identify unreturned cards when the resident leaves.
Deleting Cards: The Operation That Protects the Building
Deletion is more important than addition. The most common access control gap in residential buildings is a departed tenant whose card remains active because removing it was inconvenient.
The Deletion Workflow
- Open the card management function in the management center.
- Locate the resident or unit record and review the cards associated with it.
- Select the card to delete and confirm the deletion.
- Verify the card no longer opens the door by testing it at the entrance.
That verification step matters. Confirm that the deletion removed the credential from the system’s authorization list, not merely from a display list.
Routine Deletion Practices
- Delete cards on the day a resident checks out, not at the end of the month.
- Delete lost cards immediately, even if the resident is still in the building. A replacement can be issued the same day; leaving the lost card active is an unnecessary risk.
- Delete contractor and temporary cards when the work is complete, and keep a record of which cards were issued for which job.
- Review the card list periodically to identify stale records that were missed during busy periods.
Facial Registration: Enrollment That Holds Up in Daily Use
Face recognition at an apartment entrance is only as good as the enrollment behind it. A well-enrolled face is recognized reliably at the typical approach angle and lighting; a poorly enrolled one generates false rejects and erodes resident confidence in the system.
Before Registering a Face
Three conditions should be met:
- The resident has been informed and has consented. Facial data is biometric data, and in many jurisdictions it is subject to specific legal requirements. Enrollment should be voluntary, with card access and room list call available as alternatives for residents who decline.
- The resident is recorded against the correct apartment, so the face is associated with the right unit and permission scope.
- The enrollment location has reasonable lighting, so the captured image is usable rather than a compromise.
The Registration Workflow
The general sequence is:
- Open the face management function in the management center or on the outdoor station, depending on the configuration.
- Select the resident record to which the face will be associated.
- Enter enrollment mode and follow the on-screen guidance for positioning.
- Capture the image with the resident facing the camera directly, at the typical approach height, without heavy shadow across the face.
- Review the captured image before confirming—an unusable capture should be retaken immediately rather than accepted.
- Confirm enrollment and verify that the record appears with the correct resident and unit.
- Test recognition at the actual entrance during the day, at night, and in backlight if the entrance is exposed.
Enrollment Quality: What Actually Matters
Front-facing, unobstructed capture. Glasses, hats, and heavy shadow reduce recognition performance. If the resident normally wears glasses, enrolling with glasses is usually appropriate, since that reflects daily appearance.
Consistent lighting at enrollment. Enrolling in a dim corridor and expecting recognition in a sunlit lobby is a mismatch. Where possible, enroll under conditions similar to the actual entrance.
One record per person. Duplicate enrollment creates confusion in the management records and can affect recognition behavior. Review for existing records before enrolling.
Re-enrollment when appearance changes significantly. A major change in facial hair, eyewear, or other features may warrant re-enrollment. Residents should be able to request this without friction.
Deleting Faces
Face deletion follows the same discipline as card deletion:
- Open the face management function and locate the resident record.
- Select and confirm deletion.
- Verify that recognition no longer grants entry for that person.
Deletion should be performed promptly when a resident leaves, when a tenancy ends, or when a resident withdraws consent. Review the enrolled face list periodically to identify stale records.
Records and Privacy
Face registration should produce usable records: who was enrolled, when, by whom, and with what consent. These records support both building security investigations and privacy compliance, demonstrating that biometric data is managed, retained, and deleted according to a defined policy. Where local regulations impose requirements on biometric data, those requirements apply to the building operator, and the management center’s record-keeping should support them.
How Cards and Faces Work Together
In practice, most buildings use cards and faces as complementary methods rather than alternatives:
| User type | Typical method |
|---|---|
| Residents, daily entry | Face recognition (or card tap) |
| Residents who decline face enrollment | Card |
| Family members | Card, or face per household preference |
| Domestic and property staff | Managed card with defined scope |
| Contractors | Temporary card, deleted after the job |
| Visitors | Room list call to the apartment |
The management center’s job is to keep this matrix accurate: the right people authorized, the right scope assigned, and the right records retained. When a resident leaves, both the cards and the face associated with that unit should be removed—not just one of them.
Documentation and Handover
The management center configuration should be documented at handover, not left in the administrator’s memory. The handover file should record:
- The room numbering scheme and directory structure
- The administrator credentials, stored securely
- Which cards were issued to which units, and how many per unit
- Which residents are enrolled for face recognition, and the consent records
- Permission scopes for staff and contractor cards
- The procedure for adding and deleting cards and faces, written so that a new property manager can follow it
This documentation is what makes the system maintainable across staff changes—and staff changes in property management are frequent.
Where FARHD’s Manufacturing Model Helps
FARHD’s in-house production of TFT LCD screens, driver boards, and camera modules supports the management center in practical ways. Because the display, camera, and firmware are developed together, enrollment image quality and recognition performance can be tuned at the component level rather than accepted as whatever a third-party module delivers. Interface layouts for card and face management can be verified on the actual hardware, so menus do not overflow or truncate. And customization for OEM and ODM projects—including interface localization, terminology, and administrative workflow adjustments—can be developed as part of the product rather than outsourced.
FARHD products hold international certifications including CE, FCC, RoHS, IP65 water resistance, and EMC. Founded in 1998 with 28 years of industry experience and supported by 28 direct sales branches across China, FARHD has completed over 10,000 large-scale building video intercom projects, including ultra-large communities with 1,000, 3,000, and even over 5,000 households—experience that informs the administrative workflows, record-keeping practices, and documentation that large buildings require.
FARHD also provides a hassle-free after-sales service system: upon product delivery, a dedicated technical support group is established to assist with programming, device installation, and wiring connections throughout the process—including guidance on management center configuration, card issuance, and face registration during commissioning.
Manage the Records, Protect the Building
The management center is not a technical backwater. It is where the building’s access control is actually governed—where the room list is made accurate, where cards are issued and revoked, and where facial enrollment is documented. Buildings that manage these records carefully have entrances that work smoothly for years. Buildings that do not accumulate the quiet failures: the departed tenant’s active card, the resident whose face is no longer recognized, the visitor routed to an empty unit.
Adding cards and registering faces are simple operations. Performing them with discipline—associating credentials with records, verifying at the door, deleting promptly, and documenting the configuration—is what makes them reliable.
Whether you are configuring a new apartment development, upgrading an existing building’s access control, or building a private-label product line with OEM/ODM support, FARHD can support your project from core components to global delivery.
We look forward to building a strong partnership with you and jointly shaping the future of smart living.
Email: info@farhd.com
Website: www.farhd.com
WhatsApp: +86 188 2370 9809 / +86 199 2545 1918
Post time: Nov-13-2026